2ED21064S06JXUMA1 vs 1EDI20I12MFXUMA1 Comparación
Comparación detallada lado a lado de 2ED21064S06JXUMA1 por Infineon y 1EDI20I12MFXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
2ED21064S06JXUMA1 - 650V 0.7A Half-Bridge Gate Driver | Infineon
2ED21064S06JXUMA1 ✓ Activo
Comparación de especificaciones
| Parámetro | 2ED21064S06JXUMA1 | 1EDI20I12MFXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,85 | $1,84 |
| Función | High-Side and Low-Side Gate Driver | Isolated single-channel high-side gate driver |
| Configuration | Half-Bridge (2 outputs, non-inverting) | — |
| Topología | High-Side, Low-Side with integrated bootstrap diode | — |
| Maximum Offset / Boot Voltage | 650 V | — |
| Supply Voltage (VCC) | 10 V to 20 V | — |
| Source Current (typical) | 0.29 A | — |
| Sink Current (typical) | 0.7 A | — |
| Rise Time (typical) | [DATA_NEEDED: rise time] | — |
| Fall Time (typical) | [DATA_NEEDED: fall time] | — |
| Propagation Delay (typical) | 100 ns | — |
| Channel-to-Channel Delay Match | [DATA_NEEDED: channel-to-channel delay match] | — |
| Under-Voltage Lockout | Yes (both channels) | — |
| Bootstrap Diode | Integrated | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| Temperatura de funcionamiento | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | PG-DSO-14 (14-pin SOIC) | PG-DSO-8-51 (8-pin DSO, 4 mm creepage) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL level] | — |
| Estado RoHS | ROHS3 Compliant | Compliant |
| Negative Gate Drive Robustness | -0.7 V | — |
| Isolation Type | — | Galvanic (coreless transformer) |
| Number of Channels | — | 1 |
| Output Current (Source/Sink) | — | 2 A peak |
| Active Miller Clamp Current | — | 2 A |
| Maximum Operating Voltage (Switch side) | — | 1200 V |
| Propagation Delay (typ.) | — | 300 ns |
| Input Logic | — | Inverting / Non-inverting |
| Configuración de salida | — | Single high-side driver |
| Minimum Creepage | — | 4 mm |
| Short Circuit Protection | — | Yes (clamping) |
| Supply Voltage (Secondary) | — | [DATA_NEEDED: secondary supply voltage range] |
| CMTI | — | [DATA_NEEDED: common-mode transient immunity] |
| UVLO | — | Yes (secondary side) |