2EDL5013U2DXTMA1 vs 2EDL8034G4CXTMA1 Comparación
Comparación detallada lado a lado de 2EDL5013U2DXTMA1 por Infineon y 2EDL8034G4CXTMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | 2EDL5013U2DXTMA1 | 2EDL8034G4CXTMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,85 | $1,55 |
| Driver Configuration | High-Side, Low-Side (Half-Bridge) | — |
| Input Logic | Non-Inverting | — |
| Number of Channels | 2 | — |
| Peak Source Current | 3 A | 3 A |
| Peak Sink Current | 3 A | 4 A |
| Configuración de salida | Non-Inverting | — |
| Supply Voltage (VCC) | 4.5 V to 5.5 V | — |
| Bootstrap Voltage Rating | 120 V max | — |
| Rise Time (typ.) | 4.4 ns | — |
| Fall Time (typ.) | 3.5 ns | — |
| Miller Clamp | 7 A active Miller clamp | — |
| Bootstrap Diode | Integrated | — |
| UVLO | VCC and VBS under-voltage lockout | — |
| Rango de temperatura de funcionamiento | -40C to +125C | — |
| Encapsulado | PG-TSNP-12-5 (12-pin, 5x5 mm) | PG-VDSON-10-2 (DSN-10) with exposed pad |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | Compliant | — |
| Driver Type | — | Half-Bridge (High-Side / Low-Side) |
| Configuration | — | Non-Inverting |
| Bootstrap Voltage (Max) | — | 120 V |
| Número de salidas | — | 2 |
| Rise Time (Typical) | — | [DATA_NEEDED: rise time ns] |
| Fall Time (Typical) | — | [DATA_NEEDED: fall time ns] |
| Propagation Delay (Typical) | — | [DATA_NEEDED: propagation delay ns] |
| Input Logic Compatibility | — | 3.3 V / 5 V |
| VCC Supply Voltage | — | [DATA_NEEDED: VCC range V] |
| UVLO Protection | — | Yes (VCC and VBS) |
| Isolation Type | — | Junction-isolated (level-shifted) |
| ESD Rating (HBM) | — | [DATA_NEEDED: ESD HBM kV] |
| Temperatura de unión de funcionamiento | — | -40 C to +125 C |
| Lead-Free / RoHS | — | Yes (per Infineon product page) |
| Nivel MSL | — | [DATA_NEEDED: MSL level] |