AD7606C-16BSTZ vs AD7663ASTZ Comparación
Comparación detallada lado a lado de AD7606C-16BSTZ por Analog Devices y AD7663ASTZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | AD7606C-16BSTZ | AD7663ASTZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | ADC/DAC | ADC/DAC |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $49,22 | $11,20 |
| Architecture | SAR ADC, 16-bit, 8-channel simultaneous sampling | SAR (PulSAR charge-redistribution) |
| Number of Channels | 8 single-ended (simultaneous sampling) | — |
| Resolución | 16 bit | 16 bit |
| Sample Rate (per channel) | 1 MSPS | — |
| Input Type | True bipolar, single-ended | Differential (true bipolar ±10 V, 0-5 V, 0-10 V software-selectable) |
| Analog Input Range (bipolar) | ±10 V, ±5 V | — |
| Analog Input Range (unipolar) | 0 V to 5 V, 0 V to 10 V | — |
| Analog Input Impedance (RIN) | 5 MΩ | — |
| Analog Supply Voltage (AVCC) | 4.75 V to 5.25 V (single 5 V supply) | — |
| Digital I/O Supply (VDRIVE) | 2.3 V to 5.25 V | — |
| On-chip Reference | 2.5 V, low-drift, internal reference buffer | — |
| PGA / Input Conditioning | Analog input clamp protection + PGA + LPF per channel | — |
| Digital Interface | Parallel, SPI, QSPI, MICROWIRE (3-wire serial) | — |
| Digital Filter | Configurable oversampling / sinc filter | — |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | -40 °C to +85 °C |
| Encapsulado | 64-LQFP (10x10 mm) with exposed pad (BSTZ suffix) | 48-pin LQFP (7x7 mm), ST suffix |
| Nivel MSL | MSL 3 (168 hours) | 3 (168 hours floor life) |
| Compliance | ROHS3 Compliant, REACH Unaffected | — |
| Frecuencia de muestreo | — | 250 kSPS |
| Number of Input Channels | — | 1 |
| Analog Supply Voltage (AVDD) | — | 4.75 V to 5.25 V (5 V typical) |
| Digital Supply Voltage (DVDD) | — | 2.7 V to 5.25 V |
| INL (No linealidad integral) | — | ±3 LSB max (0.0046% of full scale) |
| SNR (Signal-to-Noise Ratio) | — | 90 dB typ @ 100 kHz input |
| THD (Total Harmonic Distortion) | — | -100 dB typ @ 100 kHz input |
| Data Interface | — | Parallel / Serial (software-selectable) |
| Power Dissipation | — | 35 mW typ @ 250 kSPS (5 V) |
| Tipo de montaje | — | Surface Mount |
| Estado RoHS | — | Compliant (Pb-free ST suffix) |
| Throughput (Parallel Mode) | — | 250 kSPS |
| Throughput (Serial Mode) | — | 200 kSPS |
| Input Impedance | — | [DATA_NEEDED: input impedance at IN+/IN-] |
| Aperture Delay | — | [DATA_NEEDED: aperture delay] |
| Common-Mode Rejection | — | [DATA_NEEDED: CMRR] |