AD7606C-16BSTZ vs AD7663ASTZ Vergleich
Detaillierter Direktvergleich von AD7606C-16BSTZ von Analog Devices und AD7663ASTZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | AD7606C-16BSTZ | AD7663ASTZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $49,22 | $11,20 |
| Architecture | SAR ADC, 16-bit, 8-channel simultaneous sampling | SAR (PulSAR charge-redistribution) |
| Number of Channels | 8 single-ended (simultaneous sampling) | — |
| Auflösung | 16 bit | 16 bit |
| Sample Rate (per channel) | 1 MSPS | — |
| Input Type | True bipolar, single-ended | Differential (true bipolar ±10 V, 0-5 V, 0-10 V software-selectable) |
| Analog Input Range (bipolar) | ±10 V, ±5 V | — |
| Analog Input Range (unipolar) | 0 V to 5 V, 0 V to 10 V | — |
| Analog Input Impedance (RIN) | 5 MΩ | — |
| Analog Supply Voltage (AVCC) | 4.75 V to 5.25 V (single 5 V supply) | — |
| Digital I/O Supply (VDRIVE) | 2.3 V to 5.25 V | — |
| On-chip Reference | 2.5 V, low-drift, internal reference buffer | — |
| PGA / Input Conditioning | Analog input clamp protection + PGA + LPF per channel | — |
| Digital Interface | Parallel, SPI, QSPI, MICROWIRE (3-wire serial) | — |
| Digital Filter | Configurable oversampling / sinc filter | — |
| Betriebstemperaturbereich | -40 °C to +125 °C | -40 °C to +85 °C |
| Gehäuse | 64-LQFP (10x10 mm) with exposed pad (BSTZ suffix) | 48-pin LQFP (7x7 mm), ST suffix |
| MSL-Level | MSL 3 (168 hours) | 3 (168 hours floor life) |
| Compliance | ROHS3 Compliant, REACH Unaffected | — |
| Abtastrate | — | 250 kSPS |
| Number of Input Channels | — | 1 |
| Analog Supply Voltage (AVDD) | — | 4.75 V to 5.25 V (5 V typical) |
| Digital Supply Voltage (DVDD) | — | 2.7 V to 5.25 V |
| INL (Integrale Nichtlinearität) | — | ±3 LSB max (0.0046% of full scale) |
| SNR (Signal-to-Noise Ratio) | — | 90 dB typ @ 100 kHz input |
| THD (Total Harmonic Distortion) | — | -100 dB typ @ 100 kHz input |
| Data Interface | — | Parallel / Serial (software-selectable) |
| Power Dissipation | — | 35 mW typ @ 250 kSPS (5 V) |
| Montageart | — | Surface Mount |
| RoHS-Status | — | Compliant (Pb-free ST suffix) |
| Throughput (Parallel Mode) | — | 250 kSPS |
| Throughput (Serial Mode) | — | 200 kSPS |
| Input Impedance | — | [DATA_NEEDED: input impedance at IN+/IN-] |
| Aperture Delay | — | [DATA_NEEDED: aperture delay] |
| Common-Mode Rejection | — | [DATA_NEEDED: CMRR] |