ADM2567EBRNZ vs ADM2561EBRNZ Comparación
Comparación detallada lado a lado de ADM2567EBRNZ por Analog Devices y ADM2561EBRNZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ ActivoComparación de especificaciones
| Parámetro | ADM2567EBRNZ | ADM2561EBRNZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $13,84 | $6,78 |
| Isolation Voltage | 3000 V rms | — |
| Data Rate (max) | 25 Mbps | — |
| Number of Channels | 4 (signal isolation) | — |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us | — |
| Bus ESD (IEC 61000-4-2, contact) | ±15 kV (bus pins) | — |
| Bus ESD (IEC 61000-4-2, air) | ±15 kV | — |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | ±6 kV | — |
| Protocol | RS-422 / RS-485 | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Logic-Side Supply (VIO) | 1.7 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | Yes (isoPower) |
| Encapsulado | 28-pin SOIC-W (0.295", 7.50 mm body width) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: Operating temperature range] | -40C to +105C |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| Estado RoHS | Compliant | Compliant |
| Tipo de montaje | Surface Mount | Surface Mount |
| Number of Drivers / Receivers | 1 / 1 | — |
| Función | — | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| Number of Drivers/Receivers | — | 2/2 |
| Duplex | — | Full / Half |
| Velocidad de datos | — | 25 Mbps |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Hot-Swap Tolerant | — | Yes |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |