ADM2567EBRNZ vs ADM2561EBRNZ Comparaison
Comparaison détaillée côte à côte de ADM2567EBRNZ par Analog Devices et ADM2561EBRNZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ ActifComparaison des spécifications
| Paramètre | ADM2567EBRNZ | ADM2561EBRNZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $13,84 | $6,78 |
| Isolation Voltage | 3000 V rms | — |
| Data Rate (max) | 25 Mbps | — |
| Number of Channels | 4 (signal isolation) | — |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us | — |
| Bus ESD (IEC 61000-4-2, contact) | ±15 kV (bus pins) | — |
| Bus ESD (IEC 61000-4-2, air) | ±15 kV | — |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | ±6 kV | — |
| Protocol | RS-422 / RS-485 | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Logic-Side Supply (VIO) | 1.7 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | Yes (isoPower) |
| Boîtier | 28-pin SOIC-W (0.295", 7.50 mm body width) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| Plage de température de fonctionnement | [DATA_NEEDED: Operating temperature range] | -40C to +105C |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| Statut RoHS | Compliant | Compliant |
| Type de montage | Surface Mount | Surface Mount |
| Number of Drivers / Receivers | 1 / 1 | — |
| Fonction | — | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| Number of Drivers/Receivers | — | 2/2 |
| Duplex | — | Full / Half |
| Débit de données | — | 25 Mbps |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Hot-Swap Tolerant | — | Yes |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |