ADM4852AR vs ADM483EARZ-REEL Comparación
Comparación detallada lado a lado de ADM4852AR por Analog Devices y ADM483EARZ-REEL por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ ActivoComparación de especificaciones
| Parámetro | ADM4852AR | ADM483EARZ-REEL |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 differential line transceiver | — |
| Tensión de alimentación | 5 V | 5 V ±10% |
| Maximum Data Rate | 2.5 Mbps | — |
| Communication Modes | Half-duplex and full-duplex | — |
| Standards Compatibility | EIA RS-485 and RS-422 | — |
| Slew Rate | Limited | Limited (reduced for low EMI) |
| Fail-Safe Receiver | True fail-safe | — |
| Bus Topology | Multipoint bus transmission lines | — |
| Encapsulado | 8-lead SOIC | 8-SOIC (SO-8, 3.9 mm body width) |
| Tipo de montaje | Surface mount | Surface Mount |
| Número de pines | 8 pins | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Función | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Velocidad de datos | — | 250 kbps |
| ESD Protection (bus pins) | — | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) |
| Corriente de alimentación | — | 36 µA (typical, no load) |
| Bus Common-Mode Range | — | -7 V to +12 V |
| Number of Nodes on Bus | — | Up to 32 |
| Receiver Fail-Safe | — | Yes (open-circuit, shorted input) |
| Short-Circuit Protection | — | Yes (driver outputs) |
| Temperatura de funcionamiento | — | -40°C to +85°C |
| Standards Compliance | — | TIA/EIA-485-A, TIA/EIA-422 |