ADM4852AR vs ADM483EARZ-REEL तुलना

विस्तृत दोनों ओर की तुलना ADM4852AR द्वारा Analog Devices और ADM483EARZ-REEL द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM4852AR ADM4852AR - 2.5Mbps RS-485 Transceiver | Analog Devices

ADM4852AR - 2.5Mbps RS-485 Transceiver | Analog Devices

ADM4852AR ✓ सक्रिय
Analog Devices
ADM483EARZ-REEL ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices

ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices

ADM483EARZ-REEL ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM4852AR ADM483EARZ-REEL
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 differential line transceiver —
सप्लाई वोल्टेज 5 V 5 V ±10%
Maximum Data Rate 2.5 Mbps —
Communication Modes Half-duplex and full-duplex —
Standards Compatibility EIA RS-485 and RS-422 —
Slew Rate Limited Limited (reduced for low EMI)
Fail-Safe Receiver True fail-safe —
Bus Topology Multipoint bus transmission lines —
पैकेज 8-lead SOIC 8-SOIC (SO-8, 3.9 mm body width)
माउंटिंग प्रकार Surface mount Surface Mount
पिन की संख्या 8 pins —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Differential Threshold [DATA_NEEDED: receiver differential threshold] —
Propagation Delay [DATA_NEEDED: propagation delay] —
क्वाइसेंट करंट [DATA_NEEDED: quiescent current] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
RoHS स्थिति [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
फ़ंक्शन — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
डेटा दर — 250 kbps
ESD Protection (bus pins) — ±15 kV (HBM, per IEC 61000-4-2 air-discharge)
सप्लाई करंट — 36 µA (typical, no load)
Bus Common-Mode Range — -7 V to +12 V
Number of Nodes on Bus — Up to 32
Receiver Fail-Safe — Yes (open-circuit, shorted input)
Short-Circuit Protection — Yes (driver outputs)
ऑपरेटिंग तापमान — -40°C to +85°C
Standards Compliance — TIA/EIA-485-A, TIA/EIA-422

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध