BTS3046SDRATMA1 vs BTS3104SDRATMA1 Comparación
Comparación detallada lado a lado de BTS3046SDRATMA1 por Infineon y BTS3104SDRATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3046SDRATMA1 | BTS3104SDRATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,74 | $0,84 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Low-side power switch (HITFET family) |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | — |
| Load Type | Low-side switch (ground-referenced load) | — |
| Encapsulado | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-TO252-3-11 (DPAK) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 C to +150 C | -40 C to +150 C |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | Overtemperature, overcurrent, short-circuit, overvoltage, ESD |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | AEC-Q100 qualified |
| RoHS / Lead-Free | Compliant / Yes | — |
| Number of Channels | — | 1 |
| Configuración de salida | — | Low-side, N-channel |
| Drain-to-Source Voltage (V_DS) Max | — | 60 V |
| Continuous Drain Current (I_D) | — | 2 A |
| On-State Resistance (R_DS(on)) Typ | — | [DATA_NEEDED: R_DS(on) value] |
| Input Logic Level | — | CMOS-compatible (active-high) |
| Supply Voltage (V_IN) | — | [DATA_NEEDED: V_IN range] |
| Standby Current | — | [DATA_NEEDED: standby current] |
| Estado RoHS | — | Compliant |
| Sin halógenos | — | Yes |
| Nivel MSL | — | 1 |