BTS3046SDRATMA1 vs BTS3104SDRATMA1 Comparaison
Comparaison détaillée côte à côte de BTS3046SDRATMA1 par Infineon et BTS3104SDRATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS3046SDRATMA1 | BTS3104SDRATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,74 | $0,84 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Low-side power switch (HITFET family) |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | — |
| Load Type | Low-side switch (ground-referenced load) | — |
| Boîtier | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-TO252-3-11 (DPAK) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C | -40 C to +150 C |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | Overtemperature, overcurrent, short-circuit, overvoltage, ESD |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | AEC-Q100 qualified |
| RoHS / Lead-Free | Compliant / Yes | — |
| Number of Channels | — | 1 |
| Configuration de sortie | — | Low-side, N-channel |
| Drain-to-Source Voltage (V_DS) Max | — | 60 V |
| Continuous Drain Current (I_D) | — | 2 A |
| On-State Resistance (R_DS(on)) Typ | — | [DATA_NEEDED: R_DS(on) value] |
| Input Logic Level | — | CMOS-compatible (active-high) |
| Supply Voltage (V_IN) | — | [DATA_NEEDED: V_IN range] |
| Standby Current | — | [DATA_NEEDED: standby current] |
| Statut RoHS | — | Compliant |
| Sans halogène | — | Yes |
| Niveau MSL | — | 1 |