BTS3060TFATMA1 vs BTS3035TFATMA1 Comparación
Comparación detallada lado a lado de BTS3060TFATMA1 por Infineon y BTS3035TFATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3060TFATMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,65 | $0,61 |
| Product Type | Smart Low-Side Power Switch | Low-Side Power Switch |
| Manufacturer Family | HITFET | — |
| Number of Channels | 1 | 1 |
| On-Resistance (RDS(on) typ) | 50 mΩ at 25°C | — |
| Maximum Continuous Load Current | 3 A | — |
| Maximum Load Supply Voltage | 42 V | — |
| Tipo de transistor | N-Channel Vertical Power MOSFET (monolithically integrated) | — |
| Switch Configuration | Low-Side, 1:1 | — |
| Input Type | Logic-level gate input (3.3V / 5V compatible) | CMOS Logic Level |
| Diagnostic Output | Status pin (open-drain, requires pull-up) | — |
| Embedded Protection | Overcurrent, Overtemperature, Overvoltage, Open-load detection | — |
| Encapsulado | PG-TO252-3 (DPAK), 3 pins (2+Tab) | PG-TO252-3-313 (DPAK) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40°C to +150°C (junction) | -40C to +150C (junction) |
| Automotive Qualification | AEC-Q100 qualified | — |
| Packaging | Tape & Reel (TF suffix) | — |
| Estado RoHS | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Nivel MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Automotive Grade | — | AEC-Q100 qualified |