BTS3060TFATMA1 vs BTS3035TFATMA1 비교
다음의 상세 나란히 비교: BTS3060TFATMA1 제조: Infineon 및 BTS3035TFATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS3060TFATMA1 | BTS3035TFATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.65 | $0.61 |
| Product Type | Smart Low-Side Power Switch | Low-Side Power Switch |
| Manufacturer Family | HITFET | — |
| Number of Channels | 1 | 1 |
| On-Resistance (RDS(on) typ) | 50 mΩ at 25°C | — |
| Maximum Continuous Load Current | 3 A | — |
| Maximum Load Supply Voltage | 42 V | — |
| 트랜지스터 유형 | N-Channel Vertical Power MOSFET (monolithically integrated) | — |
| Switch Configuration | Low-Side, 1:1 | — |
| Input Type | Logic-level gate input (3.3V / 5V compatible) | CMOS Logic Level |
| Diagnostic Output | Status pin (open-drain, requires pull-up) | — |
| Embedded Protection | Overcurrent, Overtemperature, Overvoltage, Open-load detection | — |
| 패키지 | PG-TO252-3 (DPAK), 3 pins (2+Tab) | PG-TO252-3-313 (DPAK) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40°C to +150°C (junction) | -40C to +150C (junction) |
| Automotive Qualification | AEC-Q100 qualified | — |
| Packaging | Tape & Reel (TF suffix) | — |
| RoHS 상태 | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| MSL 레벨 | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Automotive Grade | — | AEC-Q100 qualified |