BTS4130QGAXUMA1 vs BTS5014SDAAUMA1 Comparación
Comparación detallada lado a lado de BTS4130QGAXUMA1 por Infineon y BTS5014SDAAUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS4130QGAXUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,86 | $1,55 |
| Product Type | Quad Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | 1 |
| Topología | High-Side N-Channel MOSFET with charge pump | N-Channel vertical power MOSFET with charge pump |
| Continuous Load Current per Channel | 2.1 A | — |
| On-State Resistance R_DS(on) per Channel | 130 mOhm typical | — |
| Tensión de alimentación de funcionamiento | 6 V to 18 V (extended to 28 V transient) | 5 V to 28 V (load-dump tolerant to 41 V) |
| Overvoltage Clamp (Load Dump) | 45 V typical | — |
| Quiescent Current (Standby) | [DATA_NEEDED: quiescent current value] | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C junction | -40 C to +150 C (junction) |
| Automotive Qualification | AEC-Q100 qualified | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery | — |
| Diagnostic Output | Status feedback pin | — |
| Encapsulado | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 3 (per JEDEC J-STD-020) | — |
| Estado RoHS | Compliant | Compliant |
| Nominal Load Current | — | 6 A |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Limitación de corriente | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |