BTS4130QGAXUMA1 vs BTS5014SDAAUMA1 Comparaison
Comparaison détaillée côte à côte de BTS4130QGAXUMA1 par Infineon et BTS5014SDAAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS4130QGAXUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,86 | $1,55 |
| Product Type | Quad Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | 1 |
| Topologie | High-Side N-Channel MOSFET with charge pump | N-Channel vertical power MOSFET with charge pump |
| Continuous Load Current per Channel | 2.1 A | — |
| On-State Resistance R_DS(on) per Channel | 130 mOhm typical | — |
| Tension d'alimentation de fonctionnement | 6 V to 18 V (extended to 28 V transient) | 5 V to 28 V (load-dump tolerant to 41 V) |
| Overvoltage Clamp (Load Dump) | 45 V typical | — |
| Quiescent Current (Standby) | [DATA_NEEDED: quiescent current value] | — |
| Plage de température de fonctionnement | -40 C to +150 C junction | -40 C to +150 C (junction) |
| Automotive Qualification | AEC-Q100 qualified | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery | — |
| Diagnostic Output | Status feedback pin | — |
| Boîtier | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | Compliant |
| Nominal Load Current | — | 6 A |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Limitation de courant | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |