BTS5215LAUMA1 vs BTT60302ERBXUMA1 Comparación
Comparación detallada lado a lado de BTS5215LAUMA1 por Infineon y BTT60302ERBXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTT60302ERBXUMA1 - 4A Dual-Channel High-Side PROFET Switch | Infineon
BTT60302ERBXUMA1 ✓ ActivoComparación de especificaciones
| Parámetro | BTS5215LAUMA1 | BTT60302ERBXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,18 | $1,21 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 2 | — |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | — |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Feedback | Status feedback per channel | — |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | — |
| Demagnetization | Fast demagnetization of inductive loads | — |
| Encapsulado | PG-DSO-12-9 | PG-TDSO-14-31 (14-pin SOIC with Exposed Pad) |
| Temperatura de funcionamiento | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | — |
| Estado RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | PROFET (Protected MOSFET) |
| Switch Type | — | High-Side N-Channel Power Switch |
| Número de salidas | — | 2 |
| Input-Output Ratio | — | 1:1 |
| Maximum Output Current (per channel) | — | 4 A |
| Typical Rds(on) | — | 32 mOhm |
| Rango de tensión de entrada | — | -0.3 V to 6 V (logic) |
| Load Voltage Range | — | 24 V / 48 V nominal (PROFET 24V/48V family) |
| Tipo de montaje | — | Surface Mount |
| Rango de temperatura de funcionamiento | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 |
| Integrated Protection | — | Over-current, over-voltage, over-temperature, short-circuit, reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Lead-Free / RoHS | — | Yes / Compliant |
| Nivel MSL | — | [DATA_NEEDED: MSL level] |
| Packing | — | Tape & Reel (Rexx suffix per Infineon naming) |