BTS5215LAUMA1 vs BTT60302ERBXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS5215LAUMA1 par Infineon et BTT60302ERBXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTT60302ERBXUMA1 - 4A Dual-Channel High-Side PROFET Switch | Infineon
BTT60302ERBXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS5215LAUMA1 | BTT60302ERBXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,18 | $1,21 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 2 | — |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | — |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Feedback | Status feedback per channel | — |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | — |
| Demagnetization | Fast demagnetization of inductive loads | — |
| Boîtier | PG-DSO-12-9 | PG-TDSO-14-31 (14-pin SOIC with Exposed Pad) |
| Température de fonctionnement | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | PROFET (Protected MOSFET) |
| Switch Type | — | High-Side N-Channel Power Switch |
| Nombre de sorties | — | 2 |
| Input-Output Ratio | — | 1:1 |
| Maximum Output Current (per channel) | — | 4 A |
| Typical Rds(on) | — | 32 mOhm |
| Plage de tension d'entrée | — | -0.3 V to 6 V (logic) |
| Load Voltage Range | — | 24 V / 48 V nominal (PROFET 24V/48V family) |
| Type de montage | — | Surface Mount |
| Plage de température de fonctionnement | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 |
| Integrated Protection | — | Over-current, over-voltage, over-temperature, short-circuit, reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Lead-Free / RoHS | — | Yes / Compliant |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |
| Packing | — | Tape & Reel (Rexx suffix per Infineon naming) |