BTS6143DAUMA1 vs BTS4130QGAXUMA1 Comparación
Comparación detallada lado a lado de BTS6143DAUMA1 por Infineon y BTS4130QGAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET
BTS6143DAUMA1 ✓ Activo
Comparación de especificaciones
| Parámetro | BTS6143DAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,21 | $1,86 |
| Product Type | Smart High-Side Power Switch (PROFET) | Quad Smart High-Side Power Switch |
| Number of Channels | 1 | 4 |
| Topología | High-Side | High-Side N-Channel MOSFET with charge pump |
| Configuración de salida | N-Channel vertical MOSFET | — |
| Nominal Load Voltage (Vbb) | 12 V (automotive) | — |
| Operating Voltage Range (Vbb) | [DATA_NEEDED: operating voltage range] | — |
| Continuous Output Current (IL) | 8 A (typical) | — |
| On-State Resistance (R_DS(on)) | [DATA_NEEDED: typical R_DS(on) in mOhm] | — |
| Short-Circuit Protection | Yes (with latch) | — |
| Current Limitation | Yes | — |
| Overload Protection | Yes | — |
| Apagado térmico | Yes (with auto-restart) | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Loss-of-Ground Protection | Yes | — |
| Loss-of-Vbb Protection | Yes | — |
| Diagnostic Output | Yes (status/fault feedback) | Status feedback pin |
| Operating Temperature Range (Tj) | -40 C to +150 C | — |
| Encapsulado | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Automotive Grade | Yes (AEC-Q100 qualified PROFET family) | — |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Tensión de alimentación de funcionamiento | — | 6 V to 18 V (extended to 28 V transient) |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Rango de temperatura de funcionamiento | — | -40 C to +150 C junction |
| Automotive Qualification | — | AEC-Q100 qualified |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Nivel MSL | — | 3 (per JEDEC J-STD-020) |
| Estado RoHS | — | Compliant |