BTS6143DAUMA1 vs BTS4130QGAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS6143DAUMA1 par Infineon et BTS4130QGAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET
BTS6143DAUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTS6143DAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,21 | $1,86 |
| Product Type | Smart High-Side Power Switch (PROFET) | Quad Smart High-Side Power Switch |
| Number of Channels | 1 | 4 |
| Topologie | High-Side | High-Side N-Channel MOSFET with charge pump |
| Configuration de sortie | N-Channel vertical MOSFET | — |
| Nominal Load Voltage (Vbb) | 12 V (automotive) | — |
| Operating Voltage Range (Vbb) | [DATA_NEEDED: operating voltage range] | — |
| Continuous Output Current (IL) | 8 A (typical) | — |
| On-State Resistance (R_DS(on)) | [DATA_NEEDED: typical R_DS(on) in mOhm] | — |
| Short-Circuit Protection | Yes (with latch) | — |
| Current Limitation | Yes | — |
| Overload Protection | Yes | — |
| Arrêt thermique | Yes (with auto-restart) | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Loss-of-Ground Protection | Yes | — |
| Loss-of-Vbb Protection | Yes | — |
| Diagnostic Output | Yes (status/fault feedback) | Status feedback pin |
| Operating Temperature Range (Tj) | -40 C to +150 C | — |
| Boîtier | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Grade | Yes (AEC-Q100 qualified PROFET family) | — |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Tension d'alimentation de fonctionnement | — | 6 V to 18 V (extended to 28 V transient) |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Plage de température de fonctionnement | — | -40 C to +150 C junction |
| Automotive Qualification | — | AEC-Q100 qualified |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Niveau MSL | — | 3 (per JEDEC J-STD-020) |
| Statut RoHS | — | Compliant |