BTS700121ESPXUMA2 vs BTS70041EPPXUMA1 Comparación
Comparación detallada lado a lado de BTS700121ESPXUMA2 por Infineon y BTS70041EPPXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon
BTS700121ESPXUMA2 ✓ ActivoInfineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ ActivoComparación de especificaciones
| Parámetro | BTS700121ESPXUMA2 | BTS70041EPPXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,62 | $1,45 |
| Función | Power Switch / Driver 1:1 N-Channel | — |
| Topología | High-Side | — |
| Continuous Load Current | 31.3 A | — |
| Family | PROFET (Protected FET) | — |
| Nominal Supply Voltage | 13.5 V | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | [DATA_NEEDED: operating voltage range] |
| On-State Resistance (Ron) | [DATA_NEEDED: Ron typ @ 25 C] | — |
| Number of Channels | 1 | — |
| Encapsulado | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) | PG-TSDSO-14-22 (14-pin) |
| Number of Terminals | 24 | — |
| Terminal Pitch | 0.65 mm | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 C to +150 C | — |
| Max Junction Temperature | 150 C | — |
| Protection Features | Overload, short-circuit, over-temperature, reverse battery, ground loss | — |
| Diagnostic Output | Analog current sense (IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Estado RoHS | Compliant | Compliant |
| Part Family | — | HIC-PROFET +2 12V |
| Switch Type | — | High-Side N-Channel Smart Power Switch |
| Typical R_DS(on) | — | 4 mOhm at 25 °C |
| Nominal Load Current | — | 15 A (DC) |
| Load-Dump Robustness | — | [DATA_NEEDED: load dump rating] |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS |
| Diagnostic Enable Pin (DEN) | — | Yes |
| Current Sense Output (IS) | — | Yes (analog proportional to load current) |
| Embedded Protection | — | Over-current, short-circuit, over-temperature, reverse battery |
| PWM Capability | — | Yes (low-duty cycle supported via integrated charge pump) |
| Temperatura de funcionamiento | — | -40 °C to +150 °C (junction) |
| Nivel MSL | — | MSL3 (per JEDEC J-STD-020) |
| Automotive Qualification | — | AEC-Q100 qualified |