BTS700121ESPXUMA2 vs BTS70041EPPXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS700121ESPXUMA2 par Infineon et BTS70041EPPXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon
BTS700121ESPXUMA2 ✓ ActifInfineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS700121ESPXUMA2 | BTS70041EPPXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,62 | $1,45 |
| Fonction | Power Switch / Driver 1:1 N-Channel | — |
| Topologie | High-Side | — |
| Continuous Load Current | 31.3 A | — |
| Family | PROFET (Protected FET) | — |
| Nominal Supply Voltage | 13.5 V | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | [DATA_NEEDED: operating voltage range] |
| On-State Resistance (Ron) | [DATA_NEEDED: Ron typ @ 25 C] | — |
| Number of Channels | 1 | — |
| Boîtier | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) | PG-TSDSO-14-22 (14-pin) |
| Number of Terminals | 24 | — |
| Terminal Pitch | 0.65 mm | — |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C | — |
| Max Junction Temperature | 150 C | — |
| Protection Features | Overload, short-circuit, over-temperature, reverse battery, ground loss | — |
| Diagnostic Output | Analog current sense (IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Statut RoHS | Compliant | Compliant |
| Part Family | — | HIC-PROFET +2 12V |
| Switch Type | — | High-Side N-Channel Smart Power Switch |
| Typical R_DS(on) | — | 4 mOhm at 25 °C |
| Nominal Load Current | — | 15 A (DC) |
| Load-Dump Robustness | — | [DATA_NEEDED: load dump rating] |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS |
| Diagnostic Enable Pin (DEN) | — | Yes |
| Current Sense Output (IS) | — | Yes (analog proportional to load current) |
| Embedded Protection | — | Over-current, short-circuit, over-temperature, reverse battery |
| PWM Capability | — | Yes (low-duty cycle supported via integrated charge pump) |
| Température de fonctionnement | — | -40 °C to +150 °C (junction) |
| Niveau MSL | — | MSL3 (per JEDEC J-STD-020) |
| Automotive Qualification | — | AEC-Q100 qualified |