BTS70081EPRXUMA1 vs BTS51202EKAXUMA1 Comparación
Comparación detallada lado a lado de BTS70081EPRXUMA1 por Infineon y BTS51202EKAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS70081EPRXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,95 | $1,68 |
| Función | Smart High-Side Power Switch (1:1 N-Channel) | — |
| Número de salidas | 1 | — |
| On-State Resistance (R_DS(on) typ) | 8 mOhm at 25 C | — |
| Continuous Output Current | 11 A | 2 A per channel (typical 2.5 A) |
| Limitación de corriente | [DATA_NEEDED: typical current limit value] | — |
| Operating Supply Voltage (Vbb) | 6 V to 28 V | — |
| Load Dump Tolerance | [DATA_NEEDED: load dump peak V] | — |
| Standby Current | [DATA_NEEDED: standby Iq typ] | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C (junction) | — |
| Encapsulado | PG-TSDSO-14-22 (TSSOP-EP-14) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Recuento de pines | 14 | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Thermal Resistance R_theta_JA | 35 C/W (2s2p 1 oz FR4, per datasheet) | — |
| Diagnostic Features | Open-load, short-to-GND, short-to-Vbb, overtemperature, sense current output | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Automotive Qualified | Yes (AEC-Q100, PG-TSDSO-14-22 automotive grade) | Yes |
| RoHS Compliance | Compliant | — |
| Topología | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| Number of Channels | — | 2 |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Temperatura de funcionamiento | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Estado RoHS | — | Compliant |