BTS70081EPRXUMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70081EPRXUMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70081EPRXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,95 | $1,68 |
| Fonction | Smart High-Side Power Switch (1:1 N-Channel) | — |
| Nombre de sorties | 1 | — |
| On-State Resistance (R_DS(on) typ) | 8 mOhm at 25 C | — |
| Continuous Output Current | 11 A | 2 A per channel (typical 2.5 A) |
| Limitation de courant | [DATA_NEEDED: typical current limit value] | — |
| Operating Supply Voltage (Vbb) | 6 V to 28 V | — |
| Load Dump Tolerance | [DATA_NEEDED: load dump peak V] | — |
| Standby Current | [DATA_NEEDED: standby Iq typ] | — |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | — |
| Boîtier | PG-TSDSO-14-22 (TSSOP-EP-14) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Nombre de broches | 14 | — |
| Type de montage | Surface Mount | Surface Mount |
| Thermal Resistance R_theta_JA | 35 C/W (2s2p 1 oz FR4, per datasheet) | — |
| Diagnostic Features | Open-load, short-to-GND, short-to-Vbb, overtemperature, sense current output | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Automotive Qualified | Yes (AEC-Q100, PG-TSDSO-14-22 automotive grade) | Yes |
| RoHS Compliance | Compliant | — |
| Topologie | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| Number of Channels | — | 2 |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Statut RoHS | — | Compliant |