BTS70101EPAXUMA1 vs BTS70401EPAXUMA1 Comparación
Comparación detallada lado a lado de BTS70101EPAXUMA1 por Infineon y BTS70401EPAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS70101EPAXUMA1 | BTS70401EPAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,84 | $1,05 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | — |
| Nominal Load Current | 9 A | 4.5 A |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | ReverSave (integrated) |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Apagado térmico | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| Encapsulado | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 | — |
| Estado RoHS | Compliant | Compliant |
| Technology Family | — | PROFET+2 (SMART7) |
| Number of Channels | — | 1 |
| Typical On-Resistance (RDSon) | — | 0.019 Ohm |
| Load Voltage Range | — | 3.5 V to 28 V (12 V nominal) |
| Operating Supply Voltage (VS) | — | 3.5 V to 28 V |
| Input Logic Level | — | CMOS 3.3 V / 5 V compatible |
| Current Sense Output (IS) | — | Yes (analog) |
| Diagnostic Feedback | — | Fault flag + analog IS pin |
| AEC-Q100 Qualification | — | Grade 1 (-40 C to +125 C) |
| Functional Safety | — | ISO 26262-ready |