BTS70101EPAXUMA1 vs BTS70401EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70101EPAXUMA1 par Infineon et BTS70401EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70101EPAXUMA1 | BTS70401EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,84 | $1,05 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | — |
| Nominal Load Current | 9 A | 4.5 A |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | ReverSave (integrated) |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Arrêt thermique | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| Boîtier | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 | — |
| Statut RoHS | Compliant | Compliant |
| Technology Family | — | PROFET+2 (SMART7) |
| Number of Channels | — | 1 |
| Typical On-Resistance (RDSon) | — | 0.019 Ohm |
| Load Voltage Range | — | 3.5 V to 28 V (12 V nominal) |
| Operating Supply Voltage (VS) | — | 3.5 V to 28 V |
| Input Logic Level | — | CMOS 3.3 V / 5 V compatible |
| Current Sense Output (IS) | — | Yes (analog) |
| Diagnostic Feedback | — | Fault flag + analog IS pin |
| AEC-Q100 Qualification | — | Grade 1 (-40 C to +125 C) |
| Functional Safety | — | ISO 26262-ready |