BTS70101EPAXUMA1 vs BTS70802EPAXUMA1 Comparación
Comparación detallada lado a lado de BTS70101EPAXUMA1 por Infineon y BTS70802EPAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS70101EPAXUMA1 | BTS70802EPAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,84 | $1,32 |
| Product Type | Smart High-Side Power Switch | High-Side Power Switch (PROFET) |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | — |
| Nominal Load Current | 9 A | — |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | — |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Apagado térmico | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| Encapsulado | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 | AEC-Q100 qualified |
| Estado RoHS | Compliant | Compliant |
| Topología | — | 1:1 N-Channel High-Side, 2 channels |
| Number of Channels | — | 2 |
| Número de salidas | — | 4 (2 outputs per channel architecture) |
| Continuous Load Current | — | 3 A (per channel) |
| On-Resistance (typ) | — | [DATA_NEEDED: Rdson at 25 C] |
| Supply Voltage (Vbb) | — | 5.5 V to 28 V (load dump tolerant) |
| Temperatura de funcionamiento | — | -40 C to +150 C (junction, automotive grade) |
| Standby Current | — | [DATA_NEEDED: Istandby typ] |
| Input Type | — | Active High |
| Fault Feedback | — | Current sense / diagnostic output |
| Protection Features | — | Current limit, over-temperature shutdown, reverse battery, ground loss, Vbb loss, overvoltage clamp |