BTS70101EPAXUMA1 vs BTS70802EPAXUMA1 비교
다음의 상세 나란히 비교: BTS70101EPAXUMA1 제조: Infineon 및 BTS70802EPAXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS70101EPAXUMA1 | BTS70802EPAXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.84 | $1.32 |
| Product Type | Smart High-Side Power Switch | High-Side Power Switch (PROFET) |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | — |
| Nominal Load Current | 9 A | — |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | — |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| 열 차단 | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| 패키지 | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 | AEC-Q100 qualified |
| RoHS 상태 | Compliant | Compliant |
| 토폴로지 | — | 1:1 N-Channel High-Side, 2 channels |
| Number of Channels | — | 2 |
| 출력 수 | — | 4 (2 outputs per channel architecture) |
| Continuous Load Current | — | 3 A (per channel) |
| On-Resistance (typ) | — | [DATA_NEEDED: Rdson at 25 C] |
| Supply Voltage (Vbb) | — | 5.5 V to 28 V (load dump tolerant) |
| 동작 온도 | — | -40 C to +150 C (junction, automotive grade) |
| Standby Current | — | [DATA_NEEDED: Istandby typ] |
| Input Type | — | Active High |
| Fault Feedback | — | Current sense / diagnostic output |
| Protection Features | — | Current limit, over-temperature shutdown, reverse battery, ground loss, Vbb loss, overvoltage clamp |