BTT60302ERAXUMA1 vs BTS70041EPPXUMA1 Comparación
Comparación detallada lado a lado de BTT60302ERAXUMA1 por Infineon y BTS70041EPPXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ ActivoComparación de especificaciones
| Parámetro | BTT60302ERAXUMA1 | BTS70041EPPXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,18 | $1,45 |
| Product Type | Dual-channel Smart High-Side Power Switch | — |
| Family | PROFET+ 24V | — |
| Number of Channels | 2 | — |
| On-State Resistance (typ, per channel, 25°C) | 32 mΩ | — |
| Continuous Load Current (per channel) | 4 A | — |
| Operating Supply Voltage (Vbb) | 8 V to 36 V | — |
| Load-Dump Tolerance | 42 V | — |
| Switch Type | 1:1 N-Channel high-side | High-Side N-Channel Smart Power Switch |
| Process Technology | Smart6 (vertical N-MOSFET + charge pump) | — |
| Diagnostic Output | Current sense (IS pin) | — |
| Protection Features | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection | — |
| Automotive Qualification | AEC-Q100 | AEC-Q100 qualified |
| Encapsulado | PG-TDSO-14-31 (14-pin, exposed pad) | PG-TSDSO-14-22 (14-pin) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Temperatura de funcionamiento | -40 °C to +150 °C junction | -40 °C to +150 °C (junction) |
| Standby Current | [DATA_NEEDED: standby current] | — |
| Estado RoHS | Compliant | Compliant |
| Part Family | — | HIC-PROFET +2 12V |
| Typical R_DS(on) | — | 4 mOhm at 25 °C |
| Nominal Load Current | — | 15 A (DC) |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Load-Dump Robustness | — | [DATA_NEEDED: load dump rating] |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS |
| Diagnostic Enable Pin (DEN) | — | Yes |
| Current Sense Output (IS) | — | Yes (analog proportional to load current) |
| Embedded Protection | — | Over-current, short-circuit, over-temperature, reverse battery |
| PWM Capability | — | Yes (low-duty cycle supported via integrated charge pump) |
| Nivel MSL | — | MSL3 (per JEDEC J-STD-020) |