BTT60302ERAXUMA1 vs BTS70041EPPXUMA1 Comparaison
Comparaison détaillée côte à côte de BTT60302ERAXUMA1 par Infineon et BTS70041EPPXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTT60302ERAXUMA1 | BTS70041EPPXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,18 | $1,45 |
| Product Type | Dual-channel Smart High-Side Power Switch | — |
| Family | PROFET+ 24V | — |
| Number of Channels | 2 | — |
| On-State Resistance (typ, per channel, 25°C) | 32 mΩ | — |
| Continuous Load Current (per channel) | 4 A | — |
| Operating Supply Voltage (Vbb) | 8 V to 36 V | — |
| Load-Dump Tolerance | 42 V | — |
| Switch Type | 1:1 N-Channel high-side | High-Side N-Channel Smart Power Switch |
| Process Technology | Smart6 (vertical N-MOSFET + charge pump) | — |
| Diagnostic Output | Current sense (IS pin) | — |
| Protection Features | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection | — |
| Automotive Qualification | AEC-Q100 | AEC-Q100 qualified |
| Boîtier | PG-TDSO-14-31 (14-pin, exposed pad) | PG-TSDSO-14-22 (14-pin) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40 °C to +150 °C junction | -40 °C to +150 °C (junction) |
| Standby Current | [DATA_NEEDED: standby current] | — |
| Statut RoHS | Compliant | Compliant |
| Part Family | — | HIC-PROFET +2 12V |
| Typical R_DS(on) | — | 4 mOhm at 25 °C |
| Nominal Load Current | — | 15 A (DC) |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Load-Dump Robustness | — | [DATA_NEEDED: load dump rating] |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS |
| Diagnostic Enable Pin (DEN) | — | Yes |
| Current Sense Output (IS) | — | Yes (analog proportional to load current) |
| Embedded Protection | — | Over-current, short-circuit, over-temperature, reverse battery |
| PWM Capability | — | Yes (low-duty cycle supported via integrated charge pump) |
| Niveau MSL | — | MSL3 (per JEDEC J-STD-020) |