CY7C65213-32LTXI vs FT232RL-REEL Comparación
Comparación detallada lado a lado de CY7C65213-32LTXI por Infineon y FT232RL-REEL por FTDI. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | CY7C65213-32LTXI | FT232RL-REEL |
|---|---|---|
| Marca | Infineon | FTDI |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Obsolete |
| Product Type | USB-to-UART bridge controller | — |
| USB Standard | USB 2.0 Full-Speed | USB 2.0 Full Speed (12 Mbps) |
| UART Maximum Data Rate | 3 Mbps | — |
| GPIO Count | 8 GPIOs | — |
| Serial Interface Support | RS232/RS422 | — |
| Encapsulado | 32-QFN | SSOP-28 (208 mil) |
| Package Dimensions | 5 mm × 5 mm | — |
| Tipo de montaje | Surface mount | Surface Mount |
| USB Suspend Support | SLEEP# asserted during USB suspend | — |
| Power Architecture | Fully integrated USB-to-UART bridge | — |
| Legacy UART Upgrade | Supports upgrading UART-based devices to USB | — |
| Operating Voltage | [DATA_NEEDED: operating voltage] | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| UART Electrical Levels | [DATA_NEEDED: UART logic levels] | — |
| Clock or Crystal Requirement | [DATA_NEEDED: clock or crystal requirement] | — |
| USB Bus-Powered Suspend Current | [DATA_NEEDED: suspend current] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Función | — | USB to UART serial bridge |
| Data Rate (UART) | — | 300 baud to 3 Mbaud |
| Supply Voltage (VCC) | — | 3.3 V to 5.25 V |
| Logic I/O Voltage | — | 1.8 V to 5.25 V |
| Supply Current (typical) | — | 25 mA |
| Número de pines | — | 28 |
| On-chip EEPROM | — | 1 KB |
| Internal Oscillator | — | 12 MHz (with optional external clock) |
| Transmit Buffer | — | 16 bytes |
| Receive Buffer | — | 16 bytes |
| Modem Control Signals | — | RTS, CTS, DTR, DSR, DCD, RI |
| CBUS Pins | — | 6 configurable (TX/RX LED, Clock, GPIO, PWRON, SLEEP) |
| Internal LDO | — | 3.3 V for USB transceiver |
| Drivers | — | VCP, D2XX (multi-platform) |
| Nivel MSL | — | 1 |