CY7C65213-32LTXI vs FT232RL-REEL Comparaison
Comparaison détaillée côte à côte de CY7C65213-32LTXI par Infineon et FT232RL-REEL par FTDI. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | CY7C65213-32LTXI | FT232RL-REEL |
|---|---|---|
| Marque | Infineon | FTDI |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Obsolete |
| Product Type | USB-to-UART bridge controller | — |
| USB Standard | USB 2.0 Full-Speed | USB 2.0 Full Speed (12 Mbps) |
| UART Maximum Data Rate | 3 Mbps | — |
| GPIO Count | 8 GPIOs | — |
| Serial Interface Support | RS232/RS422 | — |
| Boîtier | 32-QFN | SSOP-28 (208 mil) |
| Package Dimensions | 5 mm × 5 mm | — |
| Type de montage | Surface mount | Surface Mount |
| USB Suspend Support | SLEEP# asserted during USB suspend | — |
| Power Architecture | Fully integrated USB-to-UART bridge | — |
| Legacy UART Upgrade | Supports upgrading UART-based devices to USB | — |
| Operating Voltage | [DATA_NEEDED: operating voltage] | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| UART Electrical Levels | [DATA_NEEDED: UART logic levels] | — |
| Clock or Crystal Requirement | [DATA_NEEDED: clock or crystal requirement] | — |
| USB Bus-Powered Suspend Current | [DATA_NEEDED: suspend current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Fonction | — | USB to UART serial bridge |
| Data Rate (UART) | — | 300 baud to 3 Mbaud |
| Supply Voltage (VCC) | — | 3.3 V to 5.25 V |
| Logic I/O Voltage | — | 1.8 V to 5.25 V |
| Supply Current (typical) | — | 25 mA |
| Nombre de broches | — | 28 |
| On-chip EEPROM | — | 1 KB |
| Internal Oscillator | — | 12 MHz (with optional external clock) |
| Transmit Buffer | — | 16 bytes |
| Receive Buffer | — | 16 bytes |
| Modem Control Signals | — | RTS, CTS, DTR, DSR, DCD, RI |
| CBUS Pins | — | 6 configurable (TX/RX LED, Clock, GPIO, PWRON, SLEEP) |
| Internal LDO | — | 3.3 V for USB transceiver |
| Drivers | — | VCP, D2XX (multi-platform) |
| Niveau MSL | — | 1 |