DG211DY+T vs DG211CJ+ Comparación
Comparación detallada lado a lado de DG211DY+T por Analog Devices y DG211CJ+ por Maxim Integrated. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | DG211DY+T | DG211CJ+ |
|---|---|---|
| Marca | Analog Devices | Maxim Integrated |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Number of Circuits | 4 circuits | — |
| Switch Configuration | 1:1 SPST | 4 × SPST |
| Number of Switches | 4 normally closed SPST switches | — |
| On-Resistance | 175 ohm maximum | 175 ohm maximum |
| Technology | CMOS | CMOS |
| Positive Supply Range | +4.5 V to +18 V | — |
| Negative Supply Range | -4.5 V to -18 V | — |
| Total Supply Range | ±4.5 V to ±18 V | — |
| Turn-On Time | 1000 ns maximum | — |
| Turn-Off Time | 500 ns maximum | — |
| Switching Behavior | Break-before-make guaranteed | Guaranteed break-before-make |
| Switching Transients | Glitch-free switching | — |
| Latch-Up Protection | Guaranteed not to latch up with disconnected supplies and connected input signals | No latch-up when supplies are disconnected with input signals connected |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C | — |
| Encapsulado | 16-SOIC, 0.154 inch (3.90 mm) width | 16-pin PDIP |
| Tipo de montaje | Surface mount | Through-hole |
| Package Height | 1.75 mm maximum | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Number of Channels | — | 4 channels |
| Signal Configuration | — | 1:1 |
| Supply Voltage Range | — | ±4.5 V to ±18 V |
| Switch Type | — | Normally closed SPST analog switch |
| Continuous Terminal Current | — | 30 mA maximum |
| Peak Terminal Current | — | 20 mA maximum |
| Storage Temperature | — | to +150 °C |
| Control Interface | — | Digital control inputs |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |