DG211DY+T vs DG211CJ+ 비교
다음의 상세 나란히 비교: DG211DY+T 제조: Analog Devices 및 DG211CJ+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | DG211DY+T | DG211CJ+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Number of Circuits | 4 circuits | — |
| Switch Configuration | 1:1 SPST | 4 × SPST |
| Number of Switches | 4 normally closed SPST switches | — |
| On-Resistance | 175 ohm maximum | 175 ohm maximum |
| Technology | CMOS | CMOS |
| Positive Supply Range | +4.5 V to +18 V | — |
| Negative Supply Range | -4.5 V to -18 V | — |
| Total Supply Range | ±4.5 V to ±18 V | — |
| Turn-On Time | 1000 ns maximum | — |
| Turn-Off Time | 500 ns maximum | — |
| Switching Behavior | Break-before-make guaranteed | Guaranteed break-before-make |
| Switching Transients | Glitch-free switching | — |
| Latch-Up Protection | Guaranteed not to latch up with disconnected supplies and connected input signals | No latch-up when supplies are disconnected with input signals connected |
| 동작 온도 범위 | -40 °C to +85 °C | — |
| 패키지 | 16-SOIC, 0.154 inch (3.90 mm) width | 16-pin PDIP |
| 실장 유형 | Surface mount | Through-hole |
| Package Height | 1.75 mm maximum | — |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Number of Channels | — | 4 channels |
| Signal Configuration | — | 1:1 |
| Supply Voltage Range | — | ±4.5 V to ±18 V |
| Switch Type | — | Normally closed SPST analog switch |
| Continuous Terminal Current | — | 30 mA maximum |
| Peak Terminal Current | — | 20 mA maximum |
| Storage Temperature | — | to +150 °C |
| Control Interface | — | Digital control inputs |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |