EPC1PI8 vs EPC1PC8W Comparación
Comparación detallada lado a lado de EPC1PI8 por Altera y EPC1PC8W por Intel. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | EPC1PI8 | EPC1PC8W |
|---|---|---|
| Marca | Altera | Intel |
| Categoría | Memory ICs | Memory ICs |
| Estado del ciclo de vida | Obsolete | Obsolete |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $9,95 | $9,85 |
| Tipo de memoria | OTP Configuration PROM (EPROM-based) | OTP (One-Time Programmable) Configuration PROM |
| Tamaño de memoria | 1 Mbit | 1 Mbit (131,072 x 8 or 1,048,576 bits) |
| Programmable Type | OTP (One-Time Programmable) | — |
| Interfaz | Serial (Altera FPGA configuration protocol) | Altera/Intel proprietary serial configuration (DATA0, DCLK) |
| Maximum Configuration Clock (DCLK) | 8 MHz | — |
| Supply Voltage (VCC) | 4.5 V to 5.5 V (5 V mode); 3.0 V to 3.6 V (3.3 V mode) | 3.0 V to 3.6 V (3.3 V typical) |
| Rango de temperatura de funcionamiento | -40 C to +85 C | — |
| Encapsulado | 8-PDIP (0.300 inch, 7.62 mm) | 8-pin PDIP (PDIP-8) |
| Tipo de montaje | Through-Hole (DIP) | Through-Hole |
| Supported FPGA Families | ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX | — |
| Configuration Mode | Serial (PS mode) - Data, DCLK, nCS, OE/nCONFIG | — |
| Programming Method | External programmer + Altera BitBlaster / ByteBlaster | — |
| Recuento de pines | 8 | — |
| Estado RoHS | [DATA_NEEDED: RoHS status - not present in verified web data] | [DATA_NEEDED: rohs status] |
| Lead-Free | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Programming Voltage (VPP) | — | 5.0 V / 12.0 V (per datasheet programming algorithm) |
| Configuration Compatibility | — | Altera FLEX, ACEX, APEX, Cyclone, Cyclone II, Stratix |
| Cascadable | — | Yes (multiple EPC1 devices can be chained for larger bitstreams) |
| Programming Interface | — | 4-pin serial: nCONFIG, nSTATUS, DATA0, DCLK |
| Temperatura de funcionamiento | — | -40C to +85C (industrial, per datasheet) |
| JTAG/BSD Support | — | Per datasheet; uses Altera ByteBlaster/USB-Blaster via nCONFIG chain |
| Nivel MSL | — | 1 (unlimited floor life, non-moisture-sensitive) |