EPC1PI8 vs EPC1PC8W Comparaison
Comparaison détaillée côte à côte de EPC1PI8 par Altera et EPC1PC8W par Intel. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | EPC1PI8 | EPC1PC8W |
|---|---|---|
| Marque | Altera | Intel |
| Catégorie | Memory ICs | Memory ICs |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,95 | $9,85 |
| Type de mémoire | OTP Configuration PROM (EPROM-based) | OTP (One-Time Programmable) Configuration PROM |
| Taille de mémoire | 1 Mbit | 1 Mbit (131,072 x 8 or 1,048,576 bits) |
| Programmable Type | OTP (One-Time Programmable) | — |
| Interface | Serial (Altera FPGA configuration protocol) | Altera/Intel proprietary serial configuration (DATA0, DCLK) |
| Maximum Configuration Clock (DCLK) | 8 MHz | — |
| Supply Voltage (VCC) | 4.5 V to 5.5 V (5 V mode); 3.0 V to 3.6 V (3.3 V mode) | 3.0 V to 3.6 V (3.3 V typical) |
| Plage de température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 8-PDIP (0.300 inch, 7.62 mm) | 8-pin PDIP (PDIP-8) |
| Type de montage | Through-Hole (DIP) | Through-Hole |
| Supported FPGA Families | ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX | — |
| Configuration Mode | Serial (PS mode) - Data, DCLK, nCS, OE/nCONFIG | — |
| Programming Method | External programmer + Altera BitBlaster / ByteBlaster | — |
| Nombre de broches | 8 | — |
| Statut RoHS | [DATA_NEEDED: RoHS status - not present in verified web data] | [DATA_NEEDED: rohs status] |
| Lead-Free | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Programming Voltage (VPP) | — | 5.0 V / 12.0 V (per datasheet programming algorithm) |
| Configuration Compatibility | — | Altera FLEX, ACEX, APEX, Cyclone, Cyclone II, Stratix |
| Cascadable | — | Yes (multiple EPC1 devices can be chained for larger bitstreams) |
| Programming Interface | — | 4-pin serial: nCONFIG, nSTATUS, DATA0, DCLK |
| Température de fonctionnement | — | -40C to +85C (industrial, per datasheet) |
| JTAG/BSD Support | — | Per datasheet; uses Altera ByteBlaster/USB-Blaster via nCONFIG chain |
| Niveau MSL | — | 1 (unlimited floor life, non-moisture-sensitive) |