INA129A vs INA129PA Comparación
Comparación detallada lado a lado de INA129A por Texas Instruments y INA129PA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA129A - Precision Instrumentation Amplifier | Texas Instruments
INA129A ✓ Activo
Comparación de especificaciones
| Parámetro | INA129A | INA129PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Supply Range | ±18 V | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Bandwidth at Gain 100 | 200 kHz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | 0.5 uV/degC |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | — |
| Low-Power Design | Low-power general-purpose instrumentation amplifier | — |
| Encapsulado | 8-pin SOIC | 8-pin plastic DIP |
| Tipo de montaje | Surface mount | Through-hole |
| Input Circuit | Current-feedback input circuitry | — |
| External Gain Setting | Single external resistor | — |
| Application Class | Precision analog signal conditioning | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Maximum Input Offset Voltage | — | 50 uV |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Protected Input Voltage | — | -40 V to +40 V |
| Wide Supply Range | — | Plus or minus 18 V |
| Rango de temperatura de funcionamiento | — | -40 degC to +85 degC |
| Gain-Setting Resistor | — | 49.4 kilohm |
| Gain Equation | — | [DATA_NEEDED: INA129 gain equation] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Maximum Output Voltage | — | [DATA_NEEDED: maximum output voltage] |
| Corriente de salida máxima | — | [DATA_NEEDED: maximum output current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |