INA129A vs INA129PA Perbandingan
Perbandingan bersamaan detil INA129A dari Texas Instruments dan INA129PA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA129A | INA129PA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Supply Range | ±18 V | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Bandwidth at Gain 100 | 200 kHz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | 0.5 uV/degC |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | — |
| Low-Power Design | Low-power general-purpose instrumentation amplifier | — |
| Paket | 8-pin SOIC | 8-pin plastic DIP |
| Tipe Mounting | Surface mount | Through-hole |
| Input Circuit | Current-feedback input circuitry | — |
| External Gain Setting | Single external resistor | — |
| Application Class | Precision analog signal conditioning | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Maximum Input Offset Voltage | — | 50 uV |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Protected Input Voltage | — | -40 V to +40 V |
| Wide Supply Range | — | Plus or minus 18 V |
| Rentang Suhu Kerja | — | -40 degC to +85 degC |
| Gain-Setting Resistor | — | 49.4 kilohm |
| Gain Equation | — | [DATA_NEEDED: INA129 gain equation] |
| Arus Memerintah | — | [DATA_NEEDED: quiescent current] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Maximum Output Voltage | — | [DATA_NEEDED: maximum output voltage] |
| Arus Output Maximum | — | [DATA_NEEDED: maximum output current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |