INA146UAG4 vs INA148UA Comparación
Comparación detallada lado a lado de INA146UAG4 por Texas Instruments y INA148UA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA146UAG4 - High-Voltage Programmable Gain Difference Amplifier | Texas Instruments
INA146UAG4 ✓ ActivoComparación de especificaciones
| Parámetro | INA146UAG4 | INA148UA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | High-Voltage Programmable Gain Difference Amplifier | Precision unity-gain difference amplifier |
| Amplifier Type | Differential amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain-Bandwidth Product | 550 kHz | — |
| Encapsulado | 8-SOIC, 0.154 inch body width, 3.90 mm width | 8-pin SOIC |
| Supply Type | Single or dual supply; exact limits not stated in the verified listings | — |
| Input Type | Differential input | — |
| Common-Mode Range | Extends beyond both supply rails | — |
| Input Protection | High-voltage capability provides inherent input protection | — |
| Tipo de salida | Single-ended output | — |
| Gain Configuration | Programmable gain using an external gain-setting resistor | — |
| Operating Frequency | 550 kHz gain-bandwidth product | — |
| Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Common-Mode Input Voltage | [DATA_NEEDED: absolute maximum common-mode input voltage] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 5 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| Common-Mode Voltage Range | — | ±200 V |
| Differential Gain | — | 1 |
| Bandwidth | — | 100 kHz |
| Slew Rate | — | 1 V/µs |
| Minimum Common-Mode Rejection Ratio | — | 70 dB |
| Minimum Supply Voltage | — | 2.7 V |
| Maximum Supply Voltage | — | 36 V |
| Minimum Operating Temperature | — | −55 °C |
| Maximum Operating Temperature | — | +125 °C |
| Amplifier Count | — | 1 |
| Internal Amplifier Implementation | — | Monolithic precision bipolar operational amplifier |
| Resistor Network | — | Thin-film resistor network |
| Tipo de montaje | — | Surface mount |
| Moisture Sensitivity Level | — | MSL 3, 168 hours |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |