INA146UAG4 vs INA148UA So sánh
So sánh chi tiết song song của INA146UAG4 bằng Texas Instruments và INA148UA bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
INA146UAG4 - High-Voltage Programmable Gain Difference Amplifier | Texas Instruments
INA146UAG4 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | INA146UAG4 | INA148UA |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | High-Voltage Programmable Gain Difference Amplifier | Precision unity-gain difference amplifier |
| Amplifier Type | Differential amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain-Bandwidth Product | 550 kHz | — |
| Hộp | 8-SOIC, 0.154 inch body width, 3.90 mm width | 8-pin SOIC |
| Supply Type | Single or dual supply; exact limits not stated in the verified listings | — |
| Input Type | Differential input | — |
| Common-Mode Range | Extends beyond both supply rails | — |
| Input Protection | High-voltage capability provides inherent input protection | — |
| Kiểu đầu ra | Single-ended output | — |
| Gain Configuration | Programmable gain using an external gain-setting resistor | — |
| Operating Frequency | 550 kHz gain-bandwidth product | — |
| Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Common-Mode Input Voltage | [DATA_NEEDED: absolute maximum common-mode input voltage] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 5 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| Common-Mode Voltage Range | — | ±200 V |
| Differential Gain | — | 1 |
| Bandwidth | — | 100 kHz |
| Slew Rate | — | 1 V/µs |
| Minimum Common-Mode Rejection Ratio | — | 70 dB |
| Minimum Supply Voltage | — | 2.7 V |
| Maximum Supply Voltage | — | 36 V |
| Minimum Operating Temperature | — | −55 °C |
| Maximum Operating Temperature | — | +125 °C |
| Amplifier Count | — | 1 |
| Internal Amplifier Implementation | — | Monolithic precision bipolar operational amplifier |
| Resistor Network | — | Thin-film resistor network |
| Kiểu lắp đặt | — | Surface mount |
| Moisture Sensitivity Level | — | MSL 3, 168 hours |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |