INA2141UG4 vs INA2141U Comparación
Comparación detallada lado a lado de INA2141UG4 por Texas Instruments y INA2141U por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA2141U - Dual 100V/µs Instrumentation Amplifier | Texas Instruments
INA2141U ✓ ActivoComparación de especificaciones
| Parámetro | INA2141UG4 | INA2141U |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Dual instrumentation amplifier | — |
| Number of Channels | 2 channels | 2 channels |
| Amplifier Architecture | 3-op-amp instrumentation amplifier per channel | — |
| Gain Options | 10 or 100 V/V | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Signal-to-Noise Ratio | 117 dB | — |
| Corriente de alimentación | 15 mA | — |
| Slew Rate | 1 V/us | 4 V/µs |
| Input Offset Voltage Drift | 500 nV/°C | 0.5 µV/°C maximum |
| Maximum Output Error | 50 uV | — |
| Input Bias Current | 5 nA | 5 nA maximum |
| Output Current | 750 uA | — |
| Tensión de alimentación | 5 V | — |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 16-pin SOIC, 300 mil | 16-pin SOIC (DW) |
| Tipo de montaje | Surface mount | Surface mount |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Gain Resistors | Integrated; external feedback resistors not required | — |
| Input Circuitry | Current-feedback | — |
| Device Type | — | Dual instrumentation amplifier |
| Selectable Gain | — | 10 or 100 |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 µV maximum |
| Gain Error | — | ±0.05% maximum |
| Common-Mode Rejection Ratio | — | 117 dB minimum |
| Input Protection Range | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |