INA2141UG4 vs INA2141U Comparaison
Comparaison détaillée côte à côte de INA2141UG4 par Texas Instruments et INA2141U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA2141U - Dual 100V/µs Instrumentation Amplifier | Texas Instruments
INA2141U ✓ ActifComparaison des spécifications
| Paramètre | INA2141UG4 | INA2141U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual instrumentation amplifier | — |
| Number of Channels | 2 channels | 2 channels |
| Amplifier Architecture | 3-op-amp instrumentation amplifier per channel | — |
| Gain Options | 10 or 100 V/V | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Signal-to-Noise Ratio | 117 dB | — |
| Courant d'alimentation | 15 mA | — |
| Slew Rate | 1 V/us | 4 V/µs |
| Input Offset Voltage Drift | 500 nV/°C | 0.5 µV/°C maximum |
| Maximum Output Error | 50 uV | — |
| Input Bias Current | 5 nA | 5 nA maximum |
| Output Current | 750 uA | — |
| Tension d'alimentation | 5 V | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 16-pin SOIC, 300 mil | 16-pin SOIC (DW) |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Gain Resistors | Integrated; external feedback resistors not required | — |
| Input Circuitry | Current-feedback | — |
| Device Type | — | Dual instrumentation amplifier |
| Selectable Gain | — | 10 or 100 |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 µV maximum |
| Gain Error | — | ±0.05% maximum |
| Common-Mode Rejection Ratio | — | 117 dB minimum |
| Input Protection Range | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |