IR2132STRPBF vs IR2132SPBF Comparación
Comparación detallada lado a lado de IR2132STRPBF por Infineon y IR2132SPBF por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | IR2132STRPBF | IR2132SPBF |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $4,95 | $5,55 |
| Configuration | 3-Phase Bridge | Inverting input |
| Driver Type | Half-Bridge Gate Driver, Inverting Input | — |
| Number of Drivers | 6 (3 high-side + 3 low-side) | — |
| Offset Voltage (Max) | 600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Source Current (Typ.) | 250 mA | — |
| Sink Current (Typ.) | 500 mA | — |
| Propagation Delay (Typ.) | 675 ns | — |
| Internal Dead-Time (Typ.) | 0.8 µs | — |
| Input Logic | Inverting (HIN/LIN active-low) | — |
| Bootstrap Architecture | Yes (floating high-side channel) | — |
| Undervoltage Lockout (UVLO) | Yes, on all channels | Yes, all 6 channels |
| Over-Current Protection | Yes, with ITRIP input and FAULT output | — |
| Integrated Op-Amp | Yes (current-sense amplifier) | — |
| Fault Output | Yes, active-low latched FAULT pin | — |
| dV/dt Immunity | Yes (negative transient tolerant) | Yes |
| Encapsulado | 28-SOICWB (0.295 inch / 7.50 mm width) | 28-SOIC (Wide Body, 7.50 mm) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Estado RoHS | Compliant (PBF suffix) | — |
| Part Number | — | IR2132SPBF |
| Manufacturer | — | Infineon Technologies (formerly International Rectifier) |
| Función | — | Half-Bridge Gate Driver IC (3-phase, 6-channel) |
| Número de salidas | — | 6 (3 high-side, 3 low-side) |
| Maximum Offset Voltage (High-Side) | — | 600 V |
| Output Current (Source/Sink) | — | 0.5 A |
| Logic Input Compatibility | — | CMOS/LSTTL, down to 2.5 V logic |
| Typical Deadtime | — | 0.8 us |
| Bootstrap Design | — | Required for high-side channels |
| Negative VS Transient Tolerance | — | Yes |
| Lead-Free / RoHS | — | Yes (PbF suffix, RoHS compliant) |
| Packaging | — | Tube |
| Topología | — | 3-phase bridge driver for MOSFETs/IGBTs |