IR2132STRPBF vs IR2132SPBF Comparaison
Comparaison détaillée côte à côte de IR2132STRPBF par Infineon et IR2132SPBF par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | IR2132STRPBF | IR2132SPBF |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,95 | $5,55 |
| Configuration | 3-Phase Bridge | Inverting input |
| Driver Type | Half-Bridge Gate Driver, Inverting Input | — |
| Number of Drivers | 6 (3 high-side + 3 low-side) | — |
| Offset Voltage (Max) | 600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Source Current (Typ.) | 250 mA | — |
| Sink Current (Typ.) | 500 mA | — |
| Propagation Delay (Typ.) | 675 ns | — |
| Internal Dead-Time (Typ.) | 0.8 µs | — |
| Input Logic | Inverting (HIN/LIN active-low) | — |
| Bootstrap Architecture | Yes (floating high-side channel) | — |
| Undervoltage Lockout (UVLO) | Yes, on all channels | Yes, all 6 channels |
| Over-Current Protection | Yes, with ITRIP input and FAULT output | — |
| Integrated Op-Amp | Yes (current-sense amplifier) | — |
| Fault Output | Yes, active-low latched FAULT pin | — |
| dV/dt Immunity | Yes (negative transient tolerant) | Yes |
| Boîtier | 28-SOICWB (0.295 inch / 7.50 mm width) | 28-SOIC (Wide Body, 7.50 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Statut RoHS | Compliant (PBF suffix) | — |
| Part Number | — | IR2132SPBF |
| Manufacturer | — | Infineon Technologies (formerly International Rectifier) |
| Fonction | — | Half-Bridge Gate Driver IC (3-phase, 6-channel) |
| Nombre de sorties | — | 6 (3 high-side, 3 low-side) |
| Maximum Offset Voltage (High-Side) | — | 600 V |
| Output Current (Source/Sink) | — | 0.5 A |
| Logic Input Compatibility | — | CMOS/LSTTL, down to 2.5 V logic |
| Typical Deadtime | — | 0.8 us |
| Bootstrap Design | — | Required for high-side channels |
| Negative VS Transient Tolerance | — | Yes |
| Lead-Free / RoHS | — | Yes (PbF suffix, RoHS compliant) |
| Packaging | — | Tube |
| Topologie | — | 3-phase bridge driver for MOSFETs/IGBTs |