ISL8483IP vs ISL8483EIP Comparación
Comparación detallada lado a lado de ISL8483IP por Renesas Electronics y ISL8483EIP por Renesas Electronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Renesas Electronics
ISL8483EIP - 5V ESD-Protected RS-485/RS-422 Transceiver | Renesas
ISL8483EIP ✓ ActivoComparación de especificaciones
| Parámetro | ISL8483IP | ISL8483EIP |
|---|---|---|
| Marca | Renesas Electronics | Renesas Electronics |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Unknown | Activo |
| Product Type | RS-485/RS-422 transceiver | — |
| Transmitter and Receiver Count | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver |
| Duplex Mode | Half duplex | — |
| Maximum Data Rate | 250 kbps | — |
| Tensión de alimentación | 5 V | 5 V |
| Operating Mode | High speed or slew-rate limited | — |
| Receiver Enable | Yes | — |
| Transmitter Enable | Yes | — |
| Low-Power Shutdown | SHDN | — |
| Supported Interfaces | RS-485 and RS-422 | — |
| Technology | BiCMOS | — |
| Encapsulado | 8-PDIP | 8-pin PDIP |
| Package Body Width | 0.300 inch (7.62 mm) | — |
| Tipo de montaje | Through hole | Through-hole |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Device Type | — | Single RS-485/RS-422 transceiver |
| ESD Protection | — | ±15 kV |
| Supported Standards | — | RS-485 and RS-422 |
| Implementation Technology | — | BiCMOS |
| Driver Short-Circuit Protection | — | On-chip short-circuit current limiting |
| Thermal Protection | — | On-chip thermal shutdown |
| Recuento de pines | — | 8 pins |
| Velocidad de datos | — | [DATA_NEEDED: maximum data rate] |
| Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Input Voltage Range | — | [DATA_NEEDED: receiver input voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |