ISL8483IP vs ISL8483EIP Perbandingan
Perbandingan bersamaan detil ISL8483IP dari Renesas Electronics dan ISL8483EIP dari Renesas Electronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Renesas Electronics
ISL8483EIP - 5V ESD-Protected RS-485/RS-422 Transceiver | Renesas
ISL8483EIP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ISL8483IP | ISL8483EIP |
|---|---|---|
| Merek | Renesas Electronics | Renesas Electronics |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Unknown | Aktif |
| Product Type | RS-485/RS-422 transceiver | — |
| Transmitter and Receiver Count | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver |
| Duplex Mode | Half duplex | — |
| Maximum Data Rate | 250 kbps | — |
| Tegangan Pemuat | 5 V | 5 V |
| Operating Mode | High speed or slew-rate limited | — |
| Receiver Enable | Yes | — |
| Transmitter Enable | Yes | — |
| Low-Power Shutdown | SHDN | — |
| Supported Interfaces | RS-485 and RS-422 | — |
| Technology | BiCMOS | — |
| Paket | 8-PDIP | 8-pin PDIP |
| Package Body Width | 0.300 inch (7.62 mm) | — |
| Tipe Mounting | Through hole | Through-hole |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Arus Pemuat | [DATA_NEEDED: supply current] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Device Type | — | Single RS-485/RS-422 transceiver |
| ESD Protection | — | ±15 kV |
| Supported Standards | — | RS-485 and RS-422 |
| Implementation Technology | — | BiCMOS |
| Driver Short-Circuit Protection | — | On-chip short-circuit current limiting |
| Thermal Protection | — | On-chip thermal shutdown |
| Jumlah Pin | — | 8 pins |
| Laju Data | — | [DATA_NEEDED: maximum data rate] |
| Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Input Voltage Range | — | [DATA_NEEDED: receiver input voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |