ISO120BG vs ISO120SG Comparación
Comparación detallada lado a lado de ISO120BG por Texas Instruments y ISO120SG por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
ISO120BG - Precision 60kHz Isolation Amplifier | Texas Instruments
ISO120BG ✓ Activo
Comparación de especificaciones
| Parámetro | ISO120BG | ISO120SG |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Unknown |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,00 | $471,79 |
| Product Type | Precision low-cost isolation amplifier | Precision low-cost isolation amplifier |
| Number of Circuits | 1 circuit | 1 isolation amplifier per package |
| Bandwidth | 60 kHz | — |
| Nonlinearity | ±0.01% maximum | ±0.01% maximum at the precision operating condition |
| Operation Mode | Bipolar operation | — |
| Isolation Voltage | 1500 Vrms | — |
| Partial Discharge Testing | 100% tested | — |
| Isolation Barrier | 2 pF differential capacitive barrier | — |
| Carrier Frequency | User control | User controlled |
| External Components for 60 kHz Bandwidth | No external components required | — |
| Precision Configuration | Two external capacitors can be added | — |
| Encapsulado | 24-CDIP hermetic DIP, 16 leads | — |
| Package Length | 0.300 in (7.62 mm) | — |
| Tipo de montaje | Through-hole | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: ISO120SG operating temperature range] |
| Tensión de alimentación | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: ISO120SG supply voltage range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Tensión de salida | [DATA_NEEDED: output voltage range] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Gain | [DATA_NEEDED: gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Isolation Architecture | — | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier |
| Signal Bandwidth | — | 60 kHz |
| Isolation Voltage Rating | — | 1500 Vrms |
| Input Offset Voltage Drift | — | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition |
| Common-Mode Rejection | — | High IMR at 60 Hz |
| Supply Operation | — | Bipolar operation |
| Package Information | — | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing |
| Package Family | — | Ceramic dual in-line package (CDIP) |
| Partial Discharge Qualification | — | 100% tested for partial discharge |
| External Components | — | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation |
| Synchronization | — | ISO120 family synchronization feature |
| Input Differential Voltage Range | — | [DATA_NEEDED: ISO120SG input differential voltage range] |
| Rango de tensión de salida | — | [DATA_NEEDED: ISO120SG output voltage range] |
| Estado RoHS | — | [DATA_NEEDED: ISO120SG RoHS status] |
| REACH Status | — | [DATA_NEEDED: ISO120SG REACH status] |