ISO120BG vs ISO120SG Comparaison
Comparaison détaillée côte à côte de ISO120BG par Texas Instruments et ISO120SG par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO120BG - Precision 60kHz Isolation Amplifier | Texas Instruments
ISO120BG ✓ Actif
Comparaison des spécifications
| Paramètre | ISO120BG | ISO120SG |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $471,79 |
| Product Type | Precision low-cost isolation amplifier | Precision low-cost isolation amplifier |
| Number of Circuits | 1 circuit | 1 isolation amplifier per package |
| Bandwidth | 60 kHz | — |
| Nonlinearity | ±0.01% maximum | ±0.01% maximum at the precision operating condition |
| Operation Mode | Bipolar operation | — |
| Isolation Voltage | 1500 Vrms | — |
| Partial Discharge Testing | 100% tested | — |
| Isolation Barrier | 2 pF differential capacitive barrier | — |
| Carrier Frequency | User control | User controlled |
| External Components for 60 kHz Bandwidth | No external components required | — |
| Precision Configuration | Two external capacitors can be added | — |
| Boîtier | 24-CDIP hermetic DIP, 16 leads | — |
| Package Length | 0.300 in (7.62 mm) | — |
| Type de montage | Through-hole | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: ISO120SG operating temperature range] |
| Tension d'alimentation | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: ISO120SG supply voltage range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Tension de sortie | [DATA_NEEDED: output voltage range] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Gain | [DATA_NEEDED: gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Isolation Architecture | — | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier |
| Signal Bandwidth | — | 60 kHz |
| Isolation Voltage Rating | — | 1500 Vrms |
| Input Offset Voltage Drift | — | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition |
| Common-Mode Rejection | — | High IMR at 60 Hz |
| Supply Operation | — | Bipolar operation |
| Package Information | — | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing |
| Package Family | — | Ceramic dual in-line package (CDIP) |
| Partial Discharge Qualification | — | 100% tested for partial discharge |
| External Components | — | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation |
| Synchronization | — | ISO120 family synchronization feature |
| Input Differential Voltage Range | — | [DATA_NEEDED: ISO120SG input differential voltage range] |
| Plage de tension de sortie | — | [DATA_NEEDED: ISO120SG output voltage range] |
| Statut RoHS | — | [DATA_NEEDED: ISO120SG RoHS status] |
| REACH Status | — | [DATA_NEEDED: ISO120SG REACH status] |