ISO1211DR vs ISO122U Comparación
Comparación detallada lado a lado de ISO1211DR por Texas Instruments y ISO122U por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
ISO1211DR - 24V-60V Isolated Digital Input | Texas Instruments (Tape & Reel)
ISO1211DR ✓ ActivoComparación de especificaciones
| Parámetro | ISO1211DR | ISO122U |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | Single-channel isolated 24V to 60V digital input receiver | Precision isolation amplifier |
| Supported Digital Input Range | 24V to 60V | — |
| External-Resistor DC Input Support | 9V to 300V DC | — |
| External-Resistor AC Input Support | 9V to 300V AC | — |
| IEC 61131-2 Input Characteristics | Type 1, Type 2, and Type 3 | — |
| Type 3 Current Limit | 2.2mA to 2.47mA | — |
| Input Type | Bipolar input | — |
| Broken-Wire Detection | Supported | — |
| Rango de temperatura de funcionamiento | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 8-pin SOIC (D) | 8-pin SOIC |
| Package Code | D | — |
| Terminal Count | 8 terminals | — |
| Estilo de montaje | Surface mount | — |
| Primary Application | PLC digital input modules | — |
| Isolation Category | Isolated digital input receiver | — |
| Manufacturer | Texas Instruments | — |
| Estado RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Channels | — | 1 circuit |
| Input Signal Range | — | ±10 V |
| Maximum Nonlinearity | — | 0.020% |
| Signal Bandwidth | — | 50 kHz |
| Input Offset-Voltage Drift | — | 200 V/°C |
| Isolation Voltage | — | 1500 Vrms |
| Power-Supply Range | — | 4.5 V to 18 V |
| VS1 Quiescent Current | — | 5 mA |
| VS2 Quiescent Current | — | ±5.5 mA |
| Gain Configuration | — | Fixed unity gain |
| External Components Required | — | None |
| High-Voltage Breakdown Test Coverage | — | 100% |
| Tipo de montaje | — | Surface mount |
| Operating Voltage | — | ±4.5 V to ±18 V |