ISO1211DR vs ISO122U Comparaison
Comparaison détaillée côte à côte de ISO1211DR par Texas Instruments et ISO122U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1211DR - 24V-60V Isolated Digital Input | Texas Instruments (Tape & Reel)
ISO1211DR ✓ ActifComparaison des spécifications
| Paramètre | ISO1211DR | ISO122U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Single-channel isolated 24V to 60V digital input receiver | Precision isolation amplifier |
| Supported Digital Input Range | 24V to 60V | — |
| External-Resistor DC Input Support | 9V to 300V DC | — |
| External-Resistor AC Input Support | 9V to 300V AC | — |
| IEC 61131-2 Input Characteristics | Type 1, Type 2, and Type 3 | — |
| Type 3 Current Limit | 2.2mA to 2.47mA | — |
| Input Type | Bipolar input | — |
| Broken-Wire Detection | Supported | — |
| Plage de température de fonctionnement | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin SOIC (D) | 8-pin SOIC |
| Package Code | D | — |
| Terminal Count | 8 terminals | — |
| Style de montage | Surface mount | — |
| Primary Application | PLC digital input modules | — |
| Isolation Category | Isolated digital input receiver | — |
| Manufacturer | Texas Instruments | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Channels | — | 1 circuit |
| Input Signal Range | — | ±10 V |
| Maximum Nonlinearity | — | 0.020% |
| Signal Bandwidth | — | 50 kHz |
| Input Offset-Voltage Drift | — | 200 V/°C |
| Isolation Voltage | — | 1500 Vrms |
| Power-Supply Range | — | 4.5 V to 18 V |
| VS1 Quiescent Current | — | 5 mA |
| VS2 Quiescent Current | — | ±5.5 mA |
| Gain Configuration | — | Fixed unity gain |
| External Components Required | — | None |
| High-Voltage Breakdown Test Coverage | — | 100% |
| Type de montage | — | Surface mount |
| Operating Voltage | — | ±4.5 V to ±18 V |