ISO122JPE4 vs ISO122P Comparación
Comparación detallada lado a lado de ISO122JPE4 por Texas Instruments y ISO122P por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
ISO122JPE4 - Precision Isolation Amplifier | Texas Instruments
ISO122JPE4 ✓ ActivoTexas Instruments
ISO122P - Precision 50kHz Isolation Amplifier | Texas Instruments
ISO122P ✓ ActivoComparación de especificaciones
| Parámetro | ISO122JPE4 | ISO122P |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision isolation amplifier | Precision isolation amplifier |
| Number of Amplifier Channels | 1 circuit | — |
| Input Signal Range | 50 mV | — |
| Bandwidth | 50 kHz | — |
| Isolation Voltage | 1.5 kV | — |
| Supply Voltage Range | 4.5 V to 18 V | — |
| Encapsulado | 8-PDIP (16-DIP mechanical outline, 8 leads) | — |
| Tipo de montaje | Through-hole | Through-hole |
| Isolation Technology | Duty-cycle modulation-demodulation | — |
| Isolation Barrier | 2 pF differential capacitive barrier | — |
| Signal Transmission Across Barrier | Digital | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Isolation Mode | [DATA_NEEDED: isolation mode] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Circuits | — | 1 circuit |
| Maximum Nonlinearity | — | 0.020% |
| Signal Bandwidth | — | 50 kHz |
| Input Offset-Voltage Drift | — | 200 V/°C maximum |
| Power Supply Range | — | 4.5 V to 18 V |
| VS1 Quiescent Current | — | 5 mA |
| VS2 Quiescent Current | — | ±5.5 mA |
| Bipolar Supply Operation | — | ±10 V |
| High-Voltage Breakdown Rating | — | 1500 Vrms |
| Isolation Method | — | Duty-cycle modulation and demodulation |
| Differential Capacitive Barrier | — | 2 pF |
| Gain Configuration | — | Fixed unity gain |
| ISO122P Package | — | 8-pin plastic DIP |
| Single-Supply Operation | — | Supported on the high-voltage side with a 5.1 V Zener-generated negative supply |
| High-Voltage Testing | — | 100% tested for rated high-voltage breakdown |