ISO1410DW vs ADM2461EBRWZ-RL Comparación
Comparación detallada lado a lado de ISO1410DW por Texas Instruments y ADM2461EBRWZ-RL por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ ActivoComparación de especificaciones
| Parámetro | ISO1410DW | ADM2461EBRWZ-RL |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | 1/1 isolated RS-422 and RS-485 transceiver | — |
| Maximum Data Rate | 500 Kbps | 500 kbps |
| Isolation Voltage | 5 kVrms | — |
| Isolation Type | Galvanic isolation | — |
| Bus Compatibility | TIA/EIA RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | EMC protected | — |
| Rango de temperatura de funcionamiento | -40°C to +125°C | — |
| Encapsulado | 16-pin wide-body SOIC (DW) | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Tipo de montaje | Surface mount | Surface Mount |
| Number of Transceivers | 1 | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Logic-Side Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-Side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | -25 V to +25 V |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| ESD Protection | Bus pins endure high levels of IEC electrostatic discharge events | — |
| EFT Protection | Bus pins endure high levels of IEC electrical fast transient events | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | Isolated RS-485 / RS-422 Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half Duplex |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Temperatura de funcionamiento | — | -40C to +85C |
| Nivel MSL | — | 3 |